Loading ...
Loading ...
Loading ...
15
EN
3. Press the cappuccino button (fig. 22). The
message "Cappuccino" is displayed. (After a
few seconds, frothed milk runs out of the milk
spout into the cup below. Run off of milk
stops automatically and run off of coffee
begins.)
N.B.!
If you want to stop preparation, press
the CAPPUCCINO button twice. Pressing it once
stops frothed milk run-off, pressing it twice stops
coffee run-off.
Making frothed milk
1. Fill the container (B) with milk and attach it as
described in the section "Filling and attaching
the milk container".
2. Set the frothed milk regulator (B1) to the
quantity of froth required.
3. Press the CAPPUCCINO button (fig. 22) twice.
The message "Milk Frothing" is displayed.
NB!
If you want to stop preparation of
frothed milk, press the CAPPUCCINO button once.
Making caffelatte
1. Fill the container (B) with milk and attach it as
described in the section "Filling and attaching
the milk container".
2. Set the frothed milk slide (B1) to CAFFELAT-
TE.
3. Press the CAPPUCCINO button (fig. 22). The
message "Cappuccino" is displayed.
NB!
If you want to stop preparation of caf-
felatte, press the CAPPUCCINO button twice.
Making hot milk
1. Fill the container (B) with milk and attach it as
described in the section "Filling and attaching
the milk container".
2. Set the frothed milk slide(B1) to CAFFELATTE
3. Press the CAPPUCCINO button (fig. 22) twice.
The message "Milk Frothing" is displayed.
NB!
If you want to stop preparation of hot
milk , press the CAPPUCCINO button once.
Programming the quantity of coffee
and milk in the cup for cappuccino
or frothed milk
The appliance is factory preset to automatically
deliver 2.4oz of frothed milk and 2.7oz of coffee.
To modify these quantities, proceed as follows:
1. Place a cup under the coffee spouts and the
frothed milk spout (fig. 19).
2. Press and hold the CAPPUCCINO button for at
least eight seconds (fig. 22). The message
"Milk for Cappuccino Program Quantity" is
displayed.
3. Release the button. The appliance starts run-
ning off milk.
4. Once the required quantity of milk has been
run off into the cup, press the CAPPUCCINO
button again.
5. After a few seconds, the appliance starts run-
ning off coffee into the cup and the message
"Coffee for Cappuccino Program Quantity" is
displayed.
6. Once the required quantity of coffee has been
run off into the cup, press the CAPPUCCINO
button again. Coffee run-off stops and "READY"
is displayed.
The machine is now reprogrammed with the new
quantities.
Cleaning the milk container after
use
Clean the internal tubes of the milk container each
time you use it to avoid the build-up of milk
residues or blockages.
Important! Danger of burns
When cleaning
the internal tubes of the milk container, a little hot
water leaks out of the frothed milk tube (B5).
Avoid contact with splashes of water.
1 Place a cup or other container under the
frothed milk spout (B5 - fig. 19);
2. Press the "CLEAN" button (B3 - fig. 20) and hold
it down for at least eight seconds. The message
"Cleaning" is displayed.
3. Remove the milk container and clean the noz-
zle with a sponge (fig. 21).
Loading ...
Loading ...
Loading ...