Loading ...
Loading ...
Loading ...
22
EN
Auto Mode Setting
1 Switch on the device, then press AUTO button.
2 S1 will be shown on the top left corner, input the 3 settings - TEMP, TIMER and
POWER. (as above)
3 After you have set the 1st program, press AUTO button again then enter into 2nd
program setting. 3rd to 6th programs are set as 1st and 2nd.
4 When you have entered up to 9 steps as you require, press the START button to
conrm the above step mashing settings.
5 When you have entered up to 9 steps as you require, press the START button to
conrm the above step. This program only support one boiling setting in each
Recipe. You can adjust the boiling power during operation anytime. The step after
boiling will be skipped if 9 steps is too much for you. This program only support one
boiling setting in each Recipe. You can adjust the boiling power during operation
anytime.
6 When S1 temperature is reached, there’s reminder ringing, timer will not countdown
unless you press auto button to conrm. It is ingredients lling reminder.
7 The boiling reminder is same as above, when machine nish the step before boiling,
there is reminder ringing, program will not enter boiling step unless you press AUTO
button for conrmation. It is sparging reminder.
8 PAUSE button will stop the element and timer working temporarily, and you can
amend the data, afterward, press AUTO to continue.
9 Press START button when auto mode is running, you can skip the step you do not
need instantly.
10 Setting hop reminder in boiling process, press - or + for countdown timer setting.
Press TIMER button for 2nd, 3rd...9th setting. The countdown timer must be boiling
leads time>1st >2nd>3rd...>9th. Press START button start to heat.
11 Long pressing POWER and TIMER buttons for 5s in BLANK PAGE, operation enter
to recipe selection. Press “-” or “+” to choose required recipe. Recipe storage is up
to 9 programs. Press Start button to conrm the selected recipe, BLANK PAGE will
be shown on display, then press AUTO/PAUSE button enter the chosen recipe edit
page. You can press START button to run the picked up program instantly or press
AUTO/PAUSE button to edit/check the program step by step
12 If you press STOP button to skip all the step, machine stop working, and display
shown END, bell ringing for 30s, press the STOP button again enter to BLANK
PAGE.
Loading ...
Loading ...
Loading ...