Loading ...
Loading ...
Loading ...
16
EN
SAFETY INSTRUCTIONS
Read all the instruction carefully, and keep this manual for future further reference.
Do not use the device if the cord or plug is damaged. It should be replaced before
used.
Do not use a multi-sockets as power output of this device is too high. Overloading the
electric diffuse must be avoided. As the device requires extra power, do not use the
same fuse to protect other „ Large Consumers“.
Check the products rating label and make sure the water urn voltage is t for your
outlet voltage before using
The device must be only used as intended. It must be operated in a safe, fault-free
condition. Ensure to check the proper condition prior to each use.
This appliance is intended to be used in household and similar applications such
as: staff kitchen areas in shops, ofces and other working environments; farm
houses, By clients in hotels, motels and other residential type environments; bed and
breakfast type environments. Do not use this appliance outdoor.
The appliance is only to be installed in locations where it can be overseen by
trained personnel.
Setting Up The Device
The device must be positioned on a stable, secure and horizontal support structure
prior to use.
A full vessel contains boiling hot liquids and can weigh up to 40kg. Horizontal
positioning is a prerequisite for transfer pumping during the brewing process. Avoid
an unsteady base.
The device may not be moved during the brewing process. The handles are only
meant for transporting the device in an empty state.
It is imperative to keep children, frail persons, and animals away from the device
while it is in operation. Remember boiling water is very dangerous.
Always clean all the parts of your brewing equipment, hygiene is imperative to get
good brewing results.
Before use, it is acceptable to heat a quantity of hot water in the boiler to use for
sterilizing brewing equipment etc.
DELIVERY AND ASSEMBLY
Structure of the system
With the vessel, almost all styles of beer can be brewed. To do this successfully, the
system must be correctly set up. Make yourself familiar with the features of the system.
Loading ...
Loading ...
Loading ...