49VL5B-B User Manual

Loading ...

INSTALLATION MENU

NOTE

• Some features described in the Installation manual may not be supported in certain models.

LG Digital Signage Setup Menu

This menu is used after installation to configure the Digital Signage.

Signage Mode Operation

• Decide to work all functions of Signage Mode Operation or not by setting Signage Mode Operation as Yes (Work) or No (Do Not

Work).

• When Signage Mode Operation is set to Yes(Work), all functions of Signage Mode apply.

• When Signage Mode Operation is set to No(Do Not Work), all functions of Signage Mode Do Not apply and runs on initial value.

Power On Status

• Select the status of the monitor set when turning on the main power.

• You can set with PWR, STD, or LST.

• PWR always turns the monitor ON with the main power.

• STD turns the monitor on in the STAND-BY mode.

• LST turns the monitor to its previous status. If the main power were turned off in POWER ON status, the monitor would power up in

POWER ON. If it were turned off in STAND-BY status, it would power up in STAND-BY.

Key Operation

• This feature manages the usability of the local/front keys and your remote control with regard to their operations. This feature works

according to the IR Operation and Local Key Operation settings.

IR Operation

• Set LG IR Operation to On (Work) or Off (Do Not Work) to enable or disable the remote control.

(0 - Normal, 1 - Use PWR Only, 2 - Block All)

• Selecting Block All sets your monitor to block all key signals coming from general LG remote controls.

• Selecting Use PWR Only sets your monitor to block all key signals coming from general LG remote controls except for the Power key

signal.

• Selecting Normal sets your monitor to receive all key signals coming from LG remote controls normally.

• There are keys that must be operated in Service mode when Use PWR Only or Block All is selected.

(In-Start, In-Stop, Power-Only, ADJ, Installation Menu, P-Check, S-check)

NOTE

• When all IR key signals or all local key signals are blocked, the Power On Status value switches to PWR. Changing this value has been

made impossible to ensure the operation of powering on. (To prevent mistakes by the user)

Limited Mode

• This feature enables you to inhibit particular operations of the Signage functions. This feature works according to the Input Source

Change, Menu Display or OSD Display settings.

Input Source Change

• Decide to change input source or not by setting Input Source Change as On (Change possible) or Off (Change impossible).

• When Input Source Change is set to Off (Change impossible) INPUT key doesn't work.

• When Input Source Change is set to On (Change possible), then changing input source is available.

ENGLISH

Loading ...

User Manual - Page 67