CC34IQSB User Manual

Loading ...

- 4 -

OPERATION

Controls (Fig. 2)

The hood is operated using the (5) push-buttons located on the hood and the remote control.

LED colors are displayed on hood control only.

FIG. 2

(P1) Delay- Off Switch

• Yourhoodincludesa10minuteblowerdelayoffswitch.Pressthisswitchoncetoactivatethe

timer and the LED Ring (L1) flashes blue. The blower will continue to operate for 10minutes.

After 10 minutes, the blower turns off automatically.

•  To cancelthe10-minutedelay,pressthedelayswitchonceagain.

(P2) Filter Alarm Switch

• After30hoursofbloweroperation,thefilteralarmisactivatedandtheLEDring(L1)turnsred/

flashes. It indicates that the grease filters need to be cleaned.

• Aftercleaningthegreasefilters,resetthehourcounterbypressingtheFilterAlarm/TimerReset

button (P2) during display of the alarm.

(P3) Blower Speed Decrease and Off Switch

• Press to decrease blower speed, high to low.The LED ring (L1) flashesblue at a speed

proportionate to the blower setting (i.e.: four flashes is high speed, one flash is low speed, etc.)

• Continuepressingthisswitchtoturnthebloweroff.

(P4) Blower Speed Increase and On Switch

• Pressthisswitchtoturntheblowerontolowspeed.

• Pressagaintoincreaseblowerspeed,lowtohigh.TheLEDring(L1)flashesblueataspeed

proportionate to the blower setting (i.e.: four flashes is high speed, one flash is low speed, etc.)

(P5) Light Switch

Turns the lights on and off.

P1: Activate/deactivate delay-off (10 minute)

P2: Filter change indication timer reset

P3: Decreases fan motor speed until turned off (4>3>2>1>OFF)

P4: Turns fan motor on and increased speed (ON>1>2>3>4)

P5: Turns lights on/off

L1: LED Indicator Ring Signalling crown:

- Hood in standby: lights up green. 30 seconds after

the last key has been pressed the crown turns off

- Motor on: L1 lights up blue

The

frequency is proportional to the speed setting.

- 10’ TIMER function : L1 lights up and flashes blue.

- Filter alarm active: L1 lights up red

LED

RING

(P1)

(P2)

(P3)

(P4)

(P5)

Auto Shut-Off Feature

If the blower and/or the lights are on continuously for 10 hours without any user interaction with

the controls, the hood will automatically shut off. Press any control button to re-activate the hood.

Loading ...

User Manual - Page 4