Loading ...
Loading ...
Loading ...
9
3. Lock the handle frame in position by rotating the handle
frame locks on both sides counter-clockwise (Fig. 3).
Discharge Chute Assembly
1. Place the discharge chute assembly onto the gear plate,
aligning the 3 holes in the gear plate, and push down until
the chute is ush and at against the housing (Fig. 4).
2. Use the 3 discharge chute screws to secure the discharge
chute assembly to the gear plate as shown. Tighten with
the provided hex key (Fig. 5).
Battery Pack Operation
This equipment is powered by either one or two lithium-ion
batteries (additional batteries sold separately). The battery
packs are completely closed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator
(Fig. 6):
• All 4 level monitoring LEDs are lit: Battery charge level
is high.
• 3 level monitoring LEDs are lit: Battery charge level is
decreasing.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
Fig. 3
Handle frame
Rotate to
lock
Fig. 4
Discharge
chute assembly
Gear
plate
Fig. 5
Screws
Gear plate
Discharge chute
assembly
Fig. 6
Charge level indicator push button
Press
The battery is at 20% capacity and
requires charging
Light IndicatorsLights
The battery is at 50% capacity and
requires charging soon
The battery is at 70% capacity
The battery is at full capacity
Loading ...
Loading ...
Loading ...