Snow Joe ION100V-21SB-CT 100-Volt iONPRO Cordless Brushless Variable Speed Single Stage Snowblower | 21-Inch | Tool Only

User Manual - Page 13

For ION100V-21SB-CT.

PDF File Manual, 24 pages, Read Online | Download pdf file

ION100V-21SB-CT photo
Loading ...
Loading ...
Loading ...
13
2. To switch the snow blower ON, press the safety switch
button, then squeeze the switch bar lever (Fig. 14).
3. Once the snow blower starts, release the safety switch
button and proceed with operation.
4. To power OFF, release the switch bar lever.
Adjust Auger Speed
This snow blower is equipped with auger speed adjustment
system, which can set the auger speed from low to high. Fol-
low the instruction to set the auger speed to t in the working
environment. Consider the working time, snow volume, and
the surroundings when adjusting the auger speed. In general,
lower auger speed provides longer battery runtime, but smaller
plowing capacity and shorter throw distance. Check attached
table for the specs that can be aected by the auger speed.
NOTE: The specs in above table are based on the power
provided by one Snow Joe
®
iON100V-5AMP battery that
comes with the unit. Dierent battery combinations will aect
the specs.
1. To increase the auger speed, scroll the speed adjustable
dial counterclockwise with the switch bar level squeezed
(Fig. 15).
2. To reduce the auger speed, scroll the speed adjustable
dial clockwise with the switch bar lever squeezed (Fig. 15).
Changing Throw Direction and
Throw Height
mWARNING! Never direct the snow discharge chute at
the operator, at bystanders, at vehicles or at nearby windows.
The discharged snow and foreign objects accidentally picked
up by the snow blower can cause serious damage and
personal injury.
Always orient the discharge chute in the opposite direction
from where you, bystanders, surrounding vehicles or windows
are located.
1. The discharge chute can be adjusted 180 degrees by
pressing the chute rotate button in the desired direction
(Fig. 16).
Fig. 13
Battery
compartment
cover
NOTE
This snow blower can be powered by either one (1)
or two (2) Snow Joe
®
100-Volt lithium-ion batteries.
However, make sure to equip the unit with at least one
Snow Joe
®
iON100V-5AMP battery. One or two Snow
Joe
®
iON100V-2.5AMP batteries cannnot provide enough
power for the snow blower.
Fig. 14
Safety button
Switch bar
level
1
2
MIN. Auger Speed MAX. Auger Speed
Battery Runtime
Plowing Capacity
Throw Distance
30 min
15 min
12.5 tons/charge 16 tons/charge
25 ft (7.6 m) 30 ft (9 m)
Fig. 15
Speed adjusting dial
Increase speed
Reduce speed
Fig. 16
Press to turn
chute right
Press to turn
chute left
Loading ...
Loading ...
Loading ...