Loading ...
Loading ...
Loading ...
8
Technical Data
Battery Voltage* ................................... 100 V D.C.
Battery Capacity .................................. 5.0 Ah
Charging Time .....................................100 mins
.............................................................(for full charge)
Charger Input.......................................100 – 120 V AC,
.............................................................50 – 60 Hz, 500 W
Charger Output ....................................100 V DC 4 A
Run Time Max .....................................30 mins
No Load Speed ...................................1000 - 1500 RPM
Auger ...................................................2-blade paddle auger
Motor ...................................................2800 W Brushless
Clearing Width .....................................21 in. (53 cm)
Depth of Snow Cut ..............................12 in. (30 cm)
Throw Distance Max ............................30 ft (9 m)
Plowing Capacity Max .........................16 tons/charge
.............................................................(14.5 metric tons/charge)
Stages .................................................Single stage
Type of Snow .......................................Light, uy
Directional Control ............................... 180º auto-rotate chute
LED Light .............................................2.5 watt (each)
Weight (snow blower alone) ................62 lbs (28 kg)
Weight ................................................69 lbs (31 kg)
(snow blower with battery installed)
*Initial no-load voltage, when fully charged, peaks at 100 volts; nominal voltage
under typical load is 86.4 volts.
Unpacking
Carton Contents:
• Cordless snow blower with handle frame
• Discharge chute assembly
• iON100V-5AMP lithium-ion battery (1)
• iON100V-RCH battery quick charger
• Discharge chute screws (3)
• Hex key
• Manuals with registration card
1. Carefully remove the cordless snow blower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless snow
blower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suocation risk!
Assembly
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Unpacking and assembly should be
completed on a at and stable surface, with adequate space
for moving the machine and its packaging.
Adjusting the Handle Frame
1. Unlock the handle frame by rotating the handle frame
locks on both sides clockwise (Fig. 1).
2. Rotate the handle frame up in a comfortable operation
position (Fig. 2).
ONE AND DONE!
This equipment is powered by just one Snow Joe
®
100-
Volt 5.0 Ah lithium-ion battery (included).
Additional batteries will provide extended runtime,
and are sold separately. Battery options available at
snowjoe.com.
Fig. 1
Handle frame
Handle frame
lock
Fig. 2
Handle frame
Loading ...
Loading ...
Loading ...