Loading ...
Loading ...
Loading ...
14
Specifying the Product’s TCP/IP Address
If you connect the product to your computer via a network cable, you need to
specify an IP address for the product. An IP address can be obtained
automatically through the DHCP server by default, or you may specify a static IP
address via the product’s embedded web page. Please follow the steps in below
to configure the IP address of the product.
1. On the Home Screen of the LCD Touch Panel, tap
[Settings]>[Network]>[Wired] in succession and then set the IP address
for the product.
- Check [DHCP] if you wish to enable DHCP.
- Check [Static IP] if you wish to specify a static IP address. If [Static
IP] is selected, tap the IP Address/Subnet Mask/Gateway
IP/DNS Server field respectively to bring up the soft keyboard and
then enter the relevant values.
2. Tap [OK] to save the setting and go back to the previous screen.
Note:
If the system administrator has chosen DHCP, then the IP address of TCP/IP,
gateway, subnet mask, and DNS server will be automatically given.
When installing the product for the first time, it is recommended that the
Administrator retain the default system settings. The settings can be
customized at a later date once you are familiar with the operation and
functionality.
Loading ...
Loading ...
Loading ...