Loading ...
Loading ...
Loading ...
154
Replacing the ADF Friction Roller
After scanning approximately *100,000 pages through the ADF, the ADF Friction
Roller may be worn out and you may experience problems with document feeding.
In this case, you may need to replace a new ADF roller. For ordering the ADF
roller, please consult your nearest dealer and follow the procedure below to
replace it.
Disassembling Procedure
1. Press the ADF Release button.
2. Gently open the ADF Front Door to the left.
3. Hold the mylar assembly with your fingers and then lift it up as shown in
below.
4. Press the right end of the Friction Roller externally to detach it from the
slot and then detach the left end from its hole.
5. Remove rollers from the shaft.
Warning:
When replacing, be careful not to snap or damage the mylar.
Loading ...
Loading ...
Loading ...