Loading ...
Loading ...
Loading ...
12. Make sure dryer is level. Adjust leveling legs on dryer if nec-
essary.
13. With proper help, tilt dryer forward and lift. Carefully set unit
onto pedestal, placing unit’s feet into pedestal’s mounting
brackets. Refer to Figure 8 . Make sure pedestal is square
with front and back of unit.
14. Attach strap included in parts bag to dryer cabinet rear panel
and to center back of pedestal. Remove one screw from mid-
dle of dryer rear panel. Refer to Figure 9 . Reattach screw
with strap using long slot hole. Do not tighten yet. Attach
strap to back of pedestal using two screws. Refer to Figure 9 .
Tighten all screws.
15. Check if unit is level. If needed, make final adjustment to lev-
eling legs on pedestal.
16. Follow Installation Instructions from unit to finish installing
the unit.
17. Reattach dryer vent.
18. On gas dryers, reattach gas to dryer.
19. Reconnect electrical power to unit.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7 Form No. 7-04-47ENR14