Loading ...
Loading ...
FLW34K_SVG
1
3
2
1. Pedestal
2. Tighten This Nut Against Bottom of Pedestal
3. Adjust Leveling Leg
Figure 3
9. Once pedestal is level, tighten the nuts installed in step 8 up
against bottom of pedestal. Refer to Figure 3 . Make sure to
hold leg when tightening nut.
10. Move pedestal into an open work area. You will need access
to back and front of unit to attach unit to pedestal.
WARNING
To reduce the risk of personal injury, two people
are required to lift the unit onto the pedestal.
W526
11. With proper help, tilt unit forward and lift. Carefully set unit
onto pedestal. Make sure front of unit is positioned to line up
with pedestal’s mounting holes. Refer to Figure 4 . Make sure
pedestal is square with front and back of unit.
FLW17K_SVG
1
2
4
3
1. Screw
2. Washer
3. Mounting Hole
4. Nut (Dryer only - acts as a spacer)
Figure 4
12. Gather contents of the parts bag.
13. Remove front access panel at the lower front of unit by re-
moving two screws from bottom edge of panel. Refer to Fig-
ure 5 .
FLW18K_SVG
1
2
1. Front Access Panel
2. Screw
Figure 5
14. Attach washer to pedestal by placing two cap screws and
washers from inside of washer into threaded holes on front of
pedestal. Refer to Figure 4 .
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
3 Form No. 7-04-47ENR14
Loading ...
Loading ...
Loading ...