Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
30
Filter in the water inlet hose
blocked
:Warning
Danger of death!
Do not immerse the Aqua-Stop safety
device in water (it contains an electric
valve).
First, reduce the water pressure in the
supply hose:
1. Turn off the tap.
2. Select any programme (except Spin
/Drain 0/[).
3. Select
A Start/Reload. Allow the
programme to run for approx. 40 s.
4. Turn the programme selector to Off.
Pull out the mains plug.
5. Clean the filter on the tap:
Disconnect the hose from the water
tap.
Clean the filter with a small brush.
6. Clean the filter on the back of the
appliance:
Remove the hose from the rear of
the appliance.
Take out the filter with pliers and
clean it.
7. Connect the hose and check for
leaks.
Loading ...
Loading ...
Loading ...