Loading ...
Loading ...
Loading ...
34
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.
Lift the exhaust blower up and out of the stove. The gasket which seals the
exhaust blower to the exhaust blower tube is fragile, so take extra care when
removing the blower. Even when being careful, though, it is easy to tear this
fragile gasket, and since an airtight seal is crucial here, it is best to replace
this gasket (Part # PU-CBMG) every time the exhaust blower is removed.
With the exhaust blower removed, use a utility (or ash) vacuum to remove
any ash accumulation in the exhaust blower tube.
Use a soft paint brush and carefully remove any ash accumulation from the
inside of the exhaust blower, and from the exhaust blower fan blade.
Inspect the exhaust blower motor for dust accumulation and carefully
remove it, ensuring that all air cooling holes into the motor are open and free
of dust deposits.
Install the blower and side panel in the reverse order as described above.
Remember to check the condition of the exhaust blower gasket AND
remember to reconnect the thermal sensor to the top of the exhaust blower
outlet before reinstalling the side panel.
Side Panel Screws
Side Panel Screws
Rear Panel Screws
Rear Panel Screws
Loading ...
Loading ...
Loading ...