Loading ...
Loading ...
Loading ...
25
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.
DAILY MAINTENANCE
Ash Removal and Disposal
Press the “Off” button and allow the stove to complete the shut-down cycle
and cool completely.
Because of the open design of the firebox, the majority of the ash will
already be in the bottom of the stove. Open the main door of the stove and
use an old paint brush or putty knife to move ash from around the burnpot
into the floor of the stove below.
Use a long handled screwdriver or putty knife to remove any deposits left in
the burnpot, being careful to remove them from the burnpot and not allow
them to filter down into the cradle area. Excessive ash build-up in the cradle
can cause poor stove performance (See “Cleaning the Burnpot” page 26).
Remove the ashes from the bottom of the stove with a scoop, or by using an
ash (utility type) vacuum such as our Part Number AC-SV. Follow all
appliance directions.
When using a utility type vacuum for ash clean-out, be certain the vacuum is
equipped with a filter capable of preventing fine ash particles from being
blown into the room. Similarly, always be certain the stove is completely
cool and that ALL ashes are cool before vacuuming.
Dump the ashes into a metal container (as described above) and store them
on a non-combustible surface to allow any embers to cool before disposal.
The stove is now ready to resume normal operation.
Loading ...
Loading ...
Loading ...