Loading ...
Loading ...
Loading ...
customerservice@puraflame.com call: 844-377-5786
7
1) Locating the Appliance
Your new electric fireplace may be installed virtually anywhere in your
home. However, when choosing a location, ensure that the general
instructions for safety are followed.
For best results, install out of direct sunlight, water or very damp air.
Power supply service must be installed within proximity of electric
fireplace prior to finishing avoiding reconstruction.
2) Locate an outlet
Plug in (you may run the power cord out of the framed wall opening
to an existing outlet or install an outlet on a nearby wall stud within
the wall). The circuit should be 120v 15amp.
The power cord is 6ft long. If the cord is not long enough to reach the
outlet, a grounded extension cord minimum AWG No. 14 wiring and
rated to a minimum or 1875 watts may be used, please kindly noted
that it should not be longer than 7.87ft.
Make sure the outlet is in good condition and that the plug is not
loose. NEVER exceed the maximum amperage for the circuit. DO NOT
plug other appliances into the same circuit.
3) Recessed into a wall
It is available to install the unit into a wall. The opening depth 8.1” is
suggested for better ventilation. Build the opening according to the
suggested specification shown below.
Loading ...
Loading ...
Loading ...