Loading ...
Loading ...
Loading ...
customerservice@puraflame.com call: 844-377-5786
13
FLAME
The flame will be cycled from Flame A – Flame
B – Flame C – Flame Off.
LOW HEAT
To turn on the heater on half heat setting or
turn off the heater.
HIGH HEAT
To turn on the heater on full heat setting or
turn off the heater.
CRACKLING
To turn on the crackling and cycle through high
crackling sound – normal crackling sound – low
cracking sound - high crackling with wind sound
– normal crackling with wind sound – low
crackling with wind sound- off.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the
heater reach an unsafe temperature, the heater will automatically turn
OFF. To reset:
Unplug the power cord from the outlet.
Turn the Power Switch on the CONTROL PANEL to OFF. Wait at least
5 minutes.
Inspect the fireplace to make sure no vents are blocked, or clogged
with dust or lint. If they are, use a vacuum to clean the vent areas.
With the Power Switch in the OFF position, plug the power cord back
into the outlet.
Loading ...
Loading ...
Loading ...