Loading ...
Loading ...
Loading ...
If you have any questions regarding the product please call customer service at 1-800-527-1292, 8:30
a.m. - 5 p.m., CST, Monday - Friday.
WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
Fan does not operate. 1. Reverse switch not engaged. 1. Push switch firmly either up or
down.
2. Power is off or fuse is blown. 2. Turn power on or check fuse.
3. Male and female plugs not 3. Check that male and female
connected properly. plugs are connected properly
according to instructions on page
12.
Noisy operation. 1. Blades (E) are loose. 1. Tighten all blade screws (AA).
2. Cracked blade (E). 2. Replace blade (E).
3. Full range dimmer switch. 3. Replace with an approved speed
control device.
4. Fan is new. 4. Allow fan a "break in" period of a
few days, especially when running
the fan at Medium and High
speeds.
5. Motor housing (L) is loose. 5. Turn power off. Carefully loosen
motor housing (L) and verify that
mounting plate (A) is secure
according to instructions on
page 6.
Excessive wobbling. 1. Blades (E) are loose. 1. Tighten all blade screws (AA).
2. Blade arms (D) incorrectly 2. Re-install blade arms (D).
attached.
3. Unbalanced blades (E). 3. Switch one blade (E) with blade
(E) from opposite side.
4. Fan not securely mounted. 4. Turn off power. Carefully loosen
motor housing (L) and verify that
mounting plate nuts (EE) are
secure.
Fan operates but lights 1. Bulb(s) not installed correctly. 1. Re-install bulb(s).
fail. 2. Wires in outlet box not wired 2. Check wires in outlet box and, if
properly. necessary, re-wire according to
"Wiring" instructions on pages 8
and 9.
3. Wall switch to fan is off. 3. Make sure that wall switch to fan
is on.
4. Plugs not connected properly. 4. Check that plugs are connected
properly according to instructions
on page(s) 9 and/or 12.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
16
Note: A small amount of "wobble" is normal and should not be considered a defect.
Loading ...
Loading ...
Loading ...