Loading ...
Loading ...
Loading ...
Message Cause Action
Upside down
The product is leaning too much or has
turned over.
Turn the product the right way up.
Needs manual
charging
The product is set to the
Secondary
area
operating mode.
Place the product in the charging sta-
tion. This behavior is normal and no ac-
tion is required.
Next start hh:mm
The timer setting prevents the product
from operating.
Change the timer settings. Refer to
To
do the schedule settings on page 21
.
The rest period is in progress. The
product has an inbuilt standby period
according to the Standby time table.
This behavior is normal and no action
is required.
The clock on the product is not correct. Set the time. Refer to
To set the time &
date on page 25
.
Today's mowing
completed
The rest period is in progress. The
product has an inbuilt standby period
according to the Standby time table.
This behavior is normal and no action
is required.
Lifted
The lift sensor has been activated as
the product has become trapped.
Free the product.
Wheel drive prob-
lem, right/left
Grass or other object is wrapped
around the drive wheel.
Clean the wheels and around the
wheels.
Safety function
faulty
Temporary electronic or firmware rela-
ted issue in the product.
Restart the product.
If the problem remains, the message
requires action by authorized service
technician.
Electronic problem
Loop sensor prob-
lem, front/rear
Charging system
problem
Tilt sensor prob-
lem
Temporary prob-
lem
Temporary battery
problem
Temporary battery or firmware related
issue in the product.
Restart the product.
Disconnect and reconnect the battery.
If the problem remains, the message
requires action by authorized service
technician.
Battery problem
Charging current
too high
Wrong or faulty power supply unit. Restart the product.
If the problem remains, the message
requires action by authorized service
technician.
36 - Troubleshooting 982 - 003 -
Loading ...
Loading ...
Loading ...