Loading ...
Loading ...
Loading ...
3.9.3 Security level
There are 3 security levels for the product.
Function Low Medium High
Alarm X
PIN-code X X
Time lock X X X
• Alarm - An alarm goes off if the PIN-code is
not entered within 10 seconds after the
STOP button is pushed. The alarm also
goes off when the product is lifted. The
alarm stops when the PIN-code is entered.
• PIN-code - The correct PIN-code must be
entered to get access to the Menu structure
of the product. If the incorrect PIN-code is
entered 5 times, the product is locked for a
time. The lock is extended for each new
incorrect try.
• Time lock - The product locks if the PIN-
code has not been entered in 30 days. Enter
the PIN-code to get access to the product.
3.9.3.1 To set the security level
Select 1 of 3 security levels for your product.
1. Do steps 1–3 in
To get access to the menu
on page 21
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Security > Security level
.
3. Use the arrow buttons and the OK button to
select the level of security.
4. Push the
OK button.
3.9.3.2 To change the PIN-code
1. Do steps 1–3 in
To get access to the menu
on page 21
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Security > Advanced > Change PIN-code
.
3. Enter the new PIN code.
4. Push the OK button.
5. Enter the new PIN code.
6. Push the
OK button.
7. Make a note of the new PIN code. Refer to
Introduction on page 3
.
3.9.4 Lawn Coverage
The
Lawn Coverage
function is used to guide the
product to remote parts of the work area. If the
work area includes areas that are connected with
narrow passages, the
Lawn Coverage
function is
useful to be able to maintain a well-cut lawn in all
parts of the yard. The product begins to mow
when it reaches the remote area. At all other
times, the product leaves the charging station in
the standard manner and starts to mow.
Note: You can use up to 3 remote areas but the
sum of Proportion for Area 1-3 cannot exceed
100%.
3.9.4.1 To set the Lawn Coverage function
1. Do steps 1–3 in
To get access to the menu
on page 21
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Lawn Coverage > Area 1-3
.
3. Use the arrow button to select the area.
4. Push the OK button.
5. Measure the distance from the charging
station to the start of the area. Measure
along the guide wire. Refer to
To measure
the distance from the charging station on
page 24
.
6. Push the arrow buttons to select the
distance, measured in m.
7. Push the
OK button.
982 - 003 - Installation - 23
Loading ...
Loading ...
Loading ...