Loading ...
Loading ...
Loading ...
User Manual of LV-N9916C6E Series NVR
138
3. Enter Alarm Host IP and Alarm Host Port in the text fields.
The Alarm Host IP refers to the IP address of the remote PC on which the Network Video Surveillance
Software (e.g., NVMS7000) is installed, and the Alarm Host Port must be the same as the alarm
monitoring port configured in the software.
Figure 9. 17 Configure Alarm Host
4. Click to save and exit the interface.
9.2.6 Configuring Multicast
Purpose:
And for LV-N99xx NVR, using the multicast function, more than 64 cameras are connectable.
A multicast address spans the Class-D IP range of 224.0.0.0 to239.255.255.255. It is recommended to use the IP
address ranging from 239.252.0.0 to 239.255.255.255.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 9. 16.
3. Set Multicast IP, as shown in Figure 9. 18. When adding a device to the Network Video Surveillance
Software, the multicast address must be the same as the NVR’s multicast IP.
Figure 9. 18 Configure Multicast
4. Click to save and exit the interface.
Note: The multicast function should be supported by the network switch to which the NVR is connected.
9.2.7 Configuring RTSP
Purpose:
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication systems
to control streaming media servers.
Steps:
1. Enter the Network Settings menu
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings menu, as shown in Figure 9. 16.
Figure 9. 19 RTSP Settings Interface
Loading ...
Loading ...
Loading ...