Loading ...
Loading ...
Loading ...
64
EN
Shooting
2
3
Press the Q button and select ash mode.
250250 F5.6
P
i
Flash Mode
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
0.00.0
01:02:0301:02:03
10231023
AEL/AFL
U
Flash mode
4
Select an item using the front dial and press the Q button.
The options available and the order in which they are displayed vary depending on
the shooting mode. g “Flash modes that can be set by shooting mode” (P. 65)
AUTO Auto ash
The ash res automatically in low light or
backlight conditions.
#
Fill-in ash The ash res regardless of the light conditions.
$
Flash off The ash does not re.
!/
#!
Red-eye reduction ash
This function allows you to reduce the red-eye
phenomenon. In S and M modes, the ash
always res.
#SLOW
Slow synchronization
(1st curtain)
Slow shutter speeds are used to brighten dimly-lit
backgrounds.
!SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction ash
Combines slow synchronization with red-eye
reduction.
#SLOW2/
2nd
Curtain
Slow synchronization
(2nd curtain)
The ash res just before the
shutter closes to create trails
of light behind moving light
sources.
#FULL,
#1/4 etc.
Manual
For users who prefer manual operation. If you
press the INFO button, you can use the dial to
adjust the ash level.
Cautions
• In [!/#!(Red-eye reduction ash)], after the pre- ashes, it takes about 1 second
before the shutter is released. Do not move the camera until shooting is complete.
• [!/#!(Red-eye reduction ash)] may not work effectively under some shooting
conditions.
• When the ash res, the shutter speed is set to 1/250 sec. or slower. When shooting
a subject against a bright background with the ll-in ash, the background may be
overexposed.
Loading ...
Loading ...
Loading ...