Loading ...
Loading ...
Loading ...
54
EN
Shooting
2
Choosing how the camera measures brightness (metering)
Choose how the camera meters subject brightness.
1
Press the Q button and select
metering.
250250 F5.6
P
i
Metering
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
0.00.0
01:02:0301:02:03
10231023
U
AEL/AFL
Metering
2
Select an item using the front dial and press the Q button.
p
Digital ESP
metering
The camera meters exposure in 324 areas of the frame and
optimizes exposure for the current scene or (if an option other
than [OFF] is selected for [I Face Priority]) portrait subject.
This mode is recommended for general use.
H
Center weighted
averaging
metering
This metering mode provides the average
metering between the subject and the
background lighting, placing more weight on
the subject at the center.
I
Spot metering
Choose this option to meter a small area
(about 2% of the frame) with the camera
pointed at the object you wish to meter.
Exposure will be adjusted according to the
brightness at the metered point.
IHI
Spot metering -
highlight
Increases spot metering exposure. Ensures bright subjects
appear bright.
ISH
Spot metering -
shadow
Lowers spot metering exposure. Ensures dark subjects appear
dark.
3
Press the shutter button halfway.
• Normally, the camera will start metering when the shutter button is pressed halfway
and lock exposure while the shutter button is held in this position.
ISO sensitivity
Increasing ISO sensitivity increases noise (graininess) but allows photographs to be
taken when lighting is poor. The setting recommended in most situations is [AUTO],
which starts at ISO 200 — a value that balances noise and dynamic range — and then
adjusts ISO sensitivity according to shooting conditions.
1
Press Q to select ISO sensitivity.
250250 F5.6
P
i
Recommended ISO
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
U
AEL/AFL
ISO sensitivity
2
Select an item using the front dial and press the Q button.
AUTO
The sensitivity is set automatically according to the shooting
conditions.
LOW, 200 – 25600 Sensitivity is set to the selected value.
Loading ...
Loading ...
Loading ...