Loading ...
Loading ...
Loading ...
41
•
•
Problems Solutions
The display
panel
does not light
Items are still
dirty after
washing
Load is too
wet at the end
of the cycle
Load has too
many suds
Make sure that the power cord is connected to a
working outlet.
Contact a qualified repair professional to check the
display panel wiring.
Make sure that you do not overload your washer.
Make sure that you use the correct amount of detergent.
If items are extremely dirty, try washing them a second
time.
Use a high-efficiency detergent to reduce over-sudsing.
See Select a detergent on page 27.
The load may be too small. Very small loads (one or two
items) may become unbalanced and not spin out
completely.
•
•
•
•
•
Use a high-efficiency detergent to reduce over-sudsing.
See Select a detergent on page 27.
If you have “soft” water, reduce the amount of
detergent.
For small or lightly soiled loads, reduce the amount of
detergent.
•
•
•
•
•
•
•
•
ERROR CODES
Solutions
Code
Reason
E30
E10
E21
E12
EXX
Door open
Water injecting
problem while
washing
Washer doesn’t
drain
Water overflow
Other
Open, then close the door.
Make sure that no items are caught between the
door and your washer.
Make sure that the water pressure is not too low.
Straighten the water hose, if necessary.
Make sure that the inlet valve filter isn’t blocked.
•
Make sure that the drain hose is not blocked.
•
Restart you washer.
•
Try restarting your washer. If the error remains
or a different error code is displayed, contact
qualified service personnel.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
Loading ...
Loading ...
Loading ...