Loading ...
Loading ...
Loading ...
38
ELECTRONIC CONTROL SET-UP INSTRUCTIONS
Start Operating Set-Up
Washer/dryers are preset at the factory and do not require
any programming. However, if you want to change the settings,
follow the “Set-Up Codes” guide.
The rst code shown in each segment is the factory default setting.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
Code Explanation
6 06 REGULAR CYCLE PRICE (DRYER)
6 06 Represents the number of quarters (coin 1)
needed to start the dryer; may adjust from 0–200
(See VALUE OF COIN 1). Advance from 0–200 by
pressing the upper left (COTTON/WHITES) button.
Factory default of 6 quarters = $1.50.
• Press the lower middle (WARM) button once
to advance to next code.
6 08 REGULAR CYCLE PRICE (WASHER)
6 08 Represents the number of quarters (coin 1)
needed to start the washer; may adjust from 0–200
(See VALUE OF COIN 1). Increase by pressing the
middle left (COTTON/WHITES) button, decrease
by pressing the lower left (HOT) button. Factory
default of 8 quarters = $2.00.
• Press the lower middle (WARM) button once
to advance to next code.
7 05 REGULAR DRY TIME (DRYER)
7 05 Represents the number of minutes per quarter
(coin 1). Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the upper left (COTTON/WHITES)
button, value adjusts from 1–99 minutes.
• Press the lower middle (WARM) button once
to advance to next code.
7 11 WASH LENGTH (WASHER)
7 11 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes; may
adjust from 9–17 minutes. Increase by pressing the
middle left (COTTON/WHITES) button, decrease by
pressing the lower left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
8 00 TYPE OF DRYER PRICING (DRYER)
8 00 Fixed Cycle with Top Off. For detailed description,
see “General Washer/Dryer User Information.”
8 FC With Card Payment System: Fixed Cycle. For
detailed description, see “General Washer/Dryer
User Information.” Use the upper right (COLORS/
DELICATES) button to change this selection.
• Press the lower middle (WARM) button once
to advance to next code.
8 00 ADDITIONAL RINSE OPTION (WASHER)
This option is either NOT SELECTED “00”
or SELECTED “Ar.”
8 00 Not Selected “00.”
8 Ar Selected “Ar.”
Press the lower right (COLD) button once
to change this selection.
• Press the lower middle (WARM) button once
to advance to next code.
Set-Up Codes
Code Explanation
9 00 CYCLE COUNTER OPTION
This option is either NOT SELECTED “00”
or SELECTED “0C.”
9 00 Not Selected “00.”
9 0C Selected “0C” and not able to be deselected.
Press the lower right (COLD) button
three consecutive times to select “0C.”
Once selected “0C” it cannot be deselected.
• Press the lower middle (WARM) button once
to advance to next code.
If cycle counter (9 0C) is selected, the following is true:
1 00 Cycles in HUNDREDS 1 02 = 200
2 00 Cycles in ONES 2 25 = 225
TOTAL CYCLES = 225
This is “VIEW ONLY” and cannot be cleared.
• Press the lower middle (WARM) button once to advance
to next code.
Code Explanation
1. 00 MONEY COUNTER OPTION
This option is either NOT SELECTED “00”
or SELECTED “0C.”
1. 00 Not Selected “00.”
1. 0C Selected “0C.”
Press the lower right (COLD) button three
consecutive times to select “0C” and three
consecutive times to deselect (Not Selected “00”).
Counter resets by going from “OFF” to “ON.”
1. C0 Selected “C0” and not able to be deselected.
To select “C0” and not able to be deselected, rst
select “0C,” then within 2 seconds, press the lower
right (COLD) button twice, the lower left (HOT)
button once, and exit the set-up mode.
• Press the lower middle (WARM) button once
to advance to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00 Dollars in HUNDREDS 3 01 = $100.00
4 00 Dollars in ONES 4 68 = $ 68.00
5 00 Number of CENTS 5 75 = $ 00.75
TOTAL = $168.75
2. 00 SPECIAL PRICING OPTION
This option is either NOT SELECTED “00”
or SELECTED “SP.”
2. 00 Not Selected “00,” and next available code
will be A.00.
2. SP Selected “SP.” Press the lower right (COLD)
button once to change this selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes “3.XX” through “9.XX.”
• Press the lower middle (WARM) button once
to advance to next code.
Loading ...
Loading ...
Loading ...