Loading ...
Loading ...
Loading ...
28
Direct wire,
3-wire connection:
Use where local codes permit connecting
cabinet-ground conductor to neutral wire.
Direct wire cable must have 5 ft (1.52 m) of extra length
so dryer can be moved if needed.
Strip 3½" (89 mm) of outer covering from end of cable.
Strip insulation back 1" (25 mm). If using 3-wire cable
with ground wire, cut bare wire even with outer covering.
Shape ends of wires into a hook shape.
When connecting to the terminal block, place
the hooked end of the wire under the screw of
the terminal block (hook facing right), squeeze
hooked end together, and tighten screw,
as shown.
1. Loosen or remove center terminal block screw.
2. Place the hooked end of the neutral wire (white or center
wire) of direct wire cable under the center screw of
terminal block (hook facing right). Squeeze hooked end
together. Tighten screw.
A. External ground conductor screw
B. Neutral ground wire
C. Center terminal block screw
D. Neutral wire (white or center wire)
E. 3/4" (19 mm) UL Listed strain relief
C
B
A
D
E
1"
(25 mm)
3½"
(89 mm)
3. Place the hooked ends of the other direct wire cable
wires under the outer terminal block screws (hooks facing
right). Squeeze hooked ends together. Tighten screws.
4. Tighten strain relief screw.
5. Insert tab of terminal block cover into slot of dryer rear
panel. Secure cover with hold-down screw.
6. You have completed your electrical connection.
ELECTRIC DRYER ELECTRICAL CONNECTIONS
Loading ...
Loading ...
Loading ...