Loading ...
Loading ...
Loading ...
Connecting the supply cable to the mains
Install a standardized plug corresponding to the load indicated on the data plate. When connecting the cable
directly to the mains, install an omnipolar circuit-breaker with a minimum contact opening of 3 mm between
the appliance and the mains. The omipolar circuit breaker should be sized according to the load and should
comply with current regulations (the earth wire should not be interrupted by circuit breaker).
The supply cable should be positioned so that it does not reach a temperature of more than 50 with respect to
the room temperature, anywhere along its length.
Before making the connection, check that:
the electrical safety of this appliance can only be guaranteed if the cooker is correctly and efficiently
earthed, ways ensure that the earthing is efficient; if you have any doubts call in a qualified technician to
check the system. The manufacturer declines all responsibility for damage resulting from a system which
has not been earthed.
Before plugging the appliance into the mains, check that the specifications indicated on the date plate (on
the appliance and/or packaging) correspond to those of the electrical mains system of your home.
Check that the electrical capacity of the system and sockets will support the maximum power of the
appliance, as indicated on the data plate. If you have any doubts, call in a qualified technician.
If the socket and appliance plug are not compatible, have the socket replaced with a suitable model by a
qualified technician. Who will also have to ensure that the cross section of the socket cables are suitable
for the power absorbed by the appliance. The use of adapters, multiple sockets and/or extensions, is not
recommended. If their use cannot be avoided, remember to use only single or multiple adapters and
extensions which comply with current safety regulations. In these cases, never exceed the maximum
current capacity indicated on the single adapter or extension and the maximum power indicated on the
multiple adapter. The plug and socket must be easily accessible.
WARNIN G: It is essential to use specific soft wire or specific groupware bought from the manufacturer or
maintenance department to replace if the electrical soft wire has been broken.
USEFUL NOTES FOR COOKING
In the following table, some indicative hints for cooking:
FAULTS CAUSES REMEDIES
The upper crust is dark
and the lower part too
pale
Not enough heat from the
bottom
- Use the natural convection position
- Use deeper cake tins
- Lower the temperature
- Put the cake on a lower shelf
The lower part is dark
and the upper crust too
pale
Excessive heat from the
bottom
- Use the natural convection position
- Use lower side tins
- Lower the temperature
- Put the cake on a higher shelf
The outside is too
cooked and the inside
not cooked enough
Too high temperature - Lower the temperature and increase
the cooking time
The outside is too dry
even though of the right
color
Too low temperature - Increase the temperature and reduce
the cooking time.
This product must not be disposed together with the domestic waste. This product has to be
disposed at an authorized place for recycling of electrical and electronic appliances.
By collecting and recycling waste, you help save natural resources, and make sure the
product is disposed in an environmental friendly and healthy way.
Loading ...
Loading ...
Loading ...