Loading ...
Loading ...
Loading ...
● the limiter valve and the home system can support the appliance load(see data plate);
● the power supply system has an efficient earthing connection which complies with the provisions of
current regulations;
● the socket or omnipolar circuit-breaker is easily accessible once the cooker has been installed.
NOTE: do not use reducers, adaptors or shunts as they could cause overheating and burns.
Technical Specifications
Electric oven size： litres 100 /900mm
Oven size
Width 895mm
Depth 546mm
Height 470mm
Powers absorbed in accordance with models
Accessories according to models
Oven lower heating el. 1300Watt Medium grill hearting el. 2000 Watt synchromotor 4 Watt
Oven upper heating el. 1050Watt Total grill heating el. 1050+2000 Watt Shaded motor (back) 25 Watt
Oven light 15Watt Circle heating el. 2800Watt Shaded motor (top) 15Watt
Voltage end frequency： 220-240V/50Hz
Power supply Max： 2800W(220V) - 3400W (240V)
Connecting the power supply cable to the mains
The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum
contact opening of 3 mm installed between the appliance and the mains, suitable for th load indicated and
complying with current directives (the earthing wire must not be interrupted by the circuit-breaker).
The power supply cable must be positioned so that it does not exceed 50℃ more than room temperature at
any point of its length.
Before making the connection check that:
Electric connection
Cookers with a three-pole power supply cable are designed to operate with alternated current at the supply
frequency and voltage indicated on the data plate (at the bottom of the oven dashboard). The earthing
conductor of the cable is the yellow-green conductor.
Loading ...
Loading ...
Loading ...