Loading ...
Loading ...
Loading ...
26 | English
1 609 92A 3FC | (4.8.16) Bosch Power Tools
Maintenance and Cleaning
Wipe away debris or contamination with a dry, soft cloth. Do not use
cleaning agents or solvents.
In order not to affect the measuring function, decals/stickers or name
plates, especially metal ones, may not be attached in the sensor area 7 on
the front or back side of the measuring tool.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions concerning
our products and their accessories.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the nameplate of the product.
Measurement results inaccurate/implausible
Interfering metal ob-
jects in the area of the
sensor
Remove all interfering metal objects (e.g. watches,
bracelets, rings, etc.) from within range of the
sensor. Do not hold the measuring tool close to
the sensor.
Auto calibration not
successful
Perform a manual calibration.
Continuous flashing green/yellow/red,
even when no metal or “live” cable is in the vicinity.
Measuring tool is
defective.
Send the measuring tool in for service.
Cause Corrective Measure
* Therefore, please also observe other information sources (e.g. construction plans)
before drilling, sawing or routing into walls, ceilings or floors.
OBJ_BUCH-2841-002.book Page 26 Thursday, August 4, 2016 6:22 PM
Loading ...
Loading ...
Loading ...