Loading ...
Loading ...
Loading ...
English | 17
Bosch Power Tools 1 609 92A 3FC | (4.8.16)
The measuring tool may not be 100% accurate for technological
reasons. For this reason and to eliminate hazards, familiarise
yourself with the area using other sources of information, such as
building plans and photographs taken during construction, etc.
before carrying out any drilling, sawing or milling work on walls,
ceilings or floors. The accuracy of the measuring tool may be affected
by environmental influences, such the level of humidity or there being
other electronic devices nearby. The structure and condition of the walls
(e.g. damp, building materials containing metal, electrically conductive
wallpaper, insulating materials, tiles) and the number, type, size and po-
sition of the objects may distort the measurement results. Inaccurate
readings may be caused, for example, by the building materials (espe-
cially plaster and tiles) being made damp through high humidity.
These influences may result in the indicator LED lighting up green de-
spite there being an object within range of the sensor, or in the indica-
tor LED lighting up red despite there not being an object within range
of the sensor.
Make sure that you are properly earthed when taking measure-
ments. If you are not properly earthed (e.g. by wearing insulating foot-
wear or by standing on a ladder), it will not be possible to locate live
cables.
Product Description and Specifications
Intended Use
The measuring tool is intended for the detection of ferrous metals
(e.g. reinforced steel), non-ferrous metals (e.g. copper pipes) as well as
“live” wires/conductors in walls, ceilings and floors.
Product Features
The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Marking aid
2 Signal LED
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Serial number
7 Sensor area
OBJ_BUCH-2841-002.book Page 17 Thursday, August 4, 2016 6:22 PM
Loading ...
Loading ...
Loading ...