Loading ...
Loading ...
Loading ...
If the windows do not close
automatically
If the power window automatic function
(closing only) does not operate properly,
perform the following procedure to initial-
ize the power window system.
1. Place the ignition switch in the ON
position.
2. Close the door.
3. Open the window more than halfway by
operating the power window switch.
4. Pull the power window switch and hold
it to close the window, and then hold the
switch for more than 3 seconds after
the window is closed completely.
5. Release the power window switch. Op-
erate the window by automatic function
to confirm the initialization is complete.
6. Perform steps 2 through 5 above for
other windows.
If the power window automatic function
does not operate properly after perform-
ing the above procedure, have your vehicle
checked. It is recommended that you visit a
NISSAN dealer for this service.
POWER MOONROOF
The moonroof will only operate when the
ignition switch is in the ON position. The
power moonroof is operational for a period
of time, even if the ignition switch is placed
in the ACC or OFF position. If the driver's
door or the front passenger's door is
opened during this period of time, the
power to the moonroof is canceled.
Sliding the moonroof
To slide the moonroof:
• To fully open the moonroof, push the
switch
O
1
toward the open position until
it reaches the second detent. If the switch
O
1
is pushed to the first detent, only the
sunshade will open.
• To fully close the moonroof, push the
switch
O
2
toward the close position until
it reaches the second detent. If the switch
O
2
is pushed to the first detent, the
moonroof will close but the sunshade will
remain open.
• To stop the moonroof, push the switch
once more while it is opening or closing.
The moonroof will stop at the desired
position.
Tilting the moonroof
To tilt the moonroof:
• To tilt the moonroof up, push and release
the tilt switch
O
3
. When the moonroof is
open, it will automatically close and then
tilt up.
• To tilt the moonroof down, push and re-
lease the tilt switch
O
3
or push the switch
O
2
toward the close position until it
reaches the first detent.
LIC3477
DUAL PANEL MOONROOF (if so
equipped)
2-68 Instruments and controls
Loading ...
Loading ...
Loading ...