ECAM22.110.B User Manual

Loading ...

necessary�

Important!

When removing the drip tray, the grounds container must be

emptied, even if it contains few grounds�

If this is not done, when you make the next coees, the

grounds container may ll up more than expected and clog the

machine�

Cleaning the drip tray and condensate tray

Important!

If the drip tray is not emptied regularly, the water could

overow from the edge and seep inside or around the coee

maker� This could damage the machine, the surface it rests on

or the surrounding area�

The drip tray is tted with a level indicator (red) showing the

level of water it contains (g� 25)�

Before the indicator protrudes from the cup tray, the drip tray

must be emptied and cleaned�

To remove the drip tray:

1� Remove the drip tray and the grounds container (g� 24);

2� Empty the drip tray and grounds container and wash

them;

3� Check the condensate tray and empty if necessary�

4� Replace the drip tray and grounds container�

Cleaning the inside of the coee maker

Danger of electric shock!

Before cleaning internal parts, the machine must be turned

o (see “Turning o”) and unplugged from the mains power

supply.Neverimmersethecoeemakerinwater.

1� Check regularly (about once a month) that the inside of

the appliance (accessible after removing the drip tray)

is not dirty� If necessary, remove coee deposits with a

sponge�

2� Remove the residues with a vacuum cleaner (g� 26)�

Cleaning the water tank

Clean the water tank (A9) regularly (about once a month) with

a damp cloth and a little mild washing up liquid�

Cleaning the coee spouts

1� Clean the coee spouts with a sponge or cloth (g� 27)�

2� Check the holes in the coee spout are not blocked�

If necessary, remove coee deposits with a toothpick (g�

28)�

HEATING WATER

Danger of burns!

Never leave the machine unsupervised while delivering hot

water� Stop delivery of hot water as described below when the

cup is full� The hot water spout becomes hot while water is

being delivered and must be handled by the handle only�

1� possible to avoid splashes�

2� Turn the steam dial to the I position� Delivery begins�

3� Stop by turning the steam dial to the 0 position�

Please note :

If “Energy Saving” mode is active, you may have to wait a few

seconds before the hot water is delivered�

CLEANING

Cleaning the coee maker

The following parts of the machine must be cleaned regularly:

- coee grounds container (A13),

- drip tray (A17) and condensate tray (A14),

- water tank (A9),

- coee spouts (A12),

- pre-ground coee funnel (A6),

- inside of the machine (accessible after opening the infuser

door (A10))

- infuser (A11)�

Important!

• Do not use solvents, abrasive detergents or alcohol to

clean the coee maker�

With De’Longhi superautomatic coee makers, you need

not use chemical products to clean the machine�

The descaler recommended by De’Longhi is made from

natural and completely biodegradable substances�

• Noneofthecomponentscanbewashedinadishwasher.

• Donotusemetalobjectstoremoveencrustationsorcoee

deposits as they could scratch metal or plastic surfaces�

Cleaning the coee grounds container

When the light ashes, the coee grounds container

must be emptied and cleaned�

Unless you clean the grounds container, the light will continue

to ash and the appliance cannot be used to make coee�

To clean (with the machine on):

• Removethedriptray(g.24),emptyandclean.

• Empty the grounds container and clean thoroughly to

remove all residues left on the bottom�

• Also check the condensate tray (red) and empty if

Loading ...

User Manual - Page 9