Loading ...
Loading ...
Loading ...
4
Gas connection instructions
• Check that installation or local distribution regulations (type of gas and gas pressure) match the setting value of this
device.
• The setting values of this device are indicated on the type plate.
• This device is not equipped with a combustion gas drain installation. Installation and connection must comply with the
regulations in force locally and nationwide. You must check the regulations in regards to ventilation requirements.
• The gas connection must comply with the general regulations. We recommend to connect the hob with a fixed gas pipeline
or to use an approved gas hose.
• Install the pressure regulator (fig 4a) (supplied with unit) to manifold pipe using pipe-joint compound (resistant to LP and
Natural gas) on threads of manifold pipe. Turn to hand tighten plus 1/4 turn, not exceeding 1 turn for alignment. To prevent
possible damage to the gas pressure regulator, install it after the appliance is in its permanent position. When the regulator
is securely installed on the manifold pipe, the conversion nut will be easily accessible.
• Always use a full metal hose behind the oven.
• An approved gas hose should not be kinked and should not come into contact with moving parts of the kitchen furniture.
• The main gas supply must be in an easily accessible place.
• Before using the cooking unit check all the connections for leaks with a soap solution.
• The electrical installation must conform to the national and local regulations.
• Power socket and plug must always be reachable.
• Connect the unit with the supplied plug to an earthed socket.
• Damage to the connection cable may only be replaced by the manufacturer, or an approved Installer. This to prevent
dangerous situations.
Electrical connection instructions*
120 V – 60 Hz – 0,6 VA
2 Connection: gas and electrical
fig. 4a
Caution: Do not attempt any adjustment of the pressure regulator, except conversion to propane.
• The spark ignition operates through a battery AA.
• The battery is positioned in the casing at the underside.
• Replace the battery if the spark ignition does not operate
* Depending on the model
Battery spark ignition*
1,5V DC
Loading ...
Loading ...
Loading ...