Loading ...
Loading ...
Loading ...
9
Note: the PITT
®
cooking-system may only be connected by an approved installer. To ensure the safety and warranty
repairs may only be performed by approved professionals. You should only use original parts.
Failure Cause Solution Chapter / Page
A burner ignites and
turns off again.
The control knob is not pressed
long enough to activate the auto-
flame detection.
Press the control knob down long
enough to turn between full and
low heat.
Chapter 4 / page 7
The control knob is not adjusted at
the correct height.
Adjust the control knob properly. Installation manual
step 13 t/m 15.
The control-button
touches the sealing
scale.
Hob is not mounted the right way
under the countertop.
Adjust the control knob properly. Installation manual
step 13 t/m 15.
Sealing scale is not in the center
vs. control knob.
Detach sealing scale and and re-
stick again.
Installation manual
step 20 t/m 21.
Spark ignition
remains igniting.
Hob is not mounted the right way
under the countertop.
Adjust the control knob properly. Installation manual
step 13 t/m 15.
Sealing scale is not in the center
vs. control knob.
Detach sealing scale and and re-
stick again.
Installation manual
step 20 t/m 21.
The burner doesn’t
ignite.
The control knob is not adjusted at
the correct height.
Adjust the control knob properly. Installation manual
step 13 t/m 15.
The power plug is not in the power
socket.
Put the power plug into the power
socket.
Fuse malfunction / fuse in meter
cupboard is disabled.
Install a new fuse or switch on the
fuse again.
Spark ignition is dirty or wet. Clean or dry the spark ignition. Chapter 6 / page 8
Burner parts are not properly
mounted.
Ensure the burner parts are
correctly aligned with the centring
cams.
Chapter 6 / page 8
Burner parts are dirty or wet. Clean or dry the
burner parts. Make sure the
outflow holes are open.
Chapter 6 / page 8
The main gas supply is not open. Open the main gas supply.
The control knob is not pressed
long enough
Press the control knob down long
enough to turn between full and
low heat.
Chapter 4 / page 7
Battery empty* Replace battery Chapter 2 / page 4
A burner does not
burn evenly.
Burner parts are not placed
properly.
Ensure the burner parts are
correctly aligned with the centring
cams.
Chapter 6 / page 8
Burner parts are dirty or wet. Clean or dry the
burner parts. Make sure the
outflow holes are open.
Chapter 6 / page 8
Gas smell. Gas connection leaks. Check the connection. Turn main
gas supply off immediately when
you’re not able to fix it right away.
There is a burner turned on, but
not inflamed.
Close the control knob and wait a
few minutes before reigniting.
Chapter 4 / page 7
7 Failures in the PITT
®
cooking system
If the failure still remains please contact your dealer or the PITT
®
cooking customer service: See the service addresses on
page 14.
* Depending on the model
Loading ...
Loading ...
Loading ...