Loading ...
Loading ...
Equipment and Usage Safety Requirements
• The cooktop must be used in conjunction with a suitable ventilation system.
• Remove all tape and packaging before using the appliance. Destroy the packaging after unpacking the appliance. Never
allow children to play with packaging material.
• Never modify or alter the construction of the appliance. For example, do not remove panels, wire covers or screws.
• To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the
surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a hood that
projects horizontally a minimum of 5 inches beyond the bottom of the cabinet.
• Verify that cabinets above the cooktop are a maximum of 13” (330 mm) deep.
Appliance Handling Safety
• Unit is heavy and requires at least two people or proper equipment to move.
• Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance.
Safety Codes and Standards
• This appliance complies with one or more of the following Standards:
• ANSI Z21.1, The American National Standard for Household Cooking Gas Appliances
• CAN/CSA-C22.2 No. 61-M89 Household Cooking Ranges
• It is the responsibility of the owner and the installer to determine if additional requirements and/or standards apply to
specific installations.
• Installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54.
• The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, with the
National Electrical Code ANSI/ NFPA 70, latest edition. (In Canada, installation must be in accordance with the CAN
1-B149.1 and .2 Installation Codes for Gas Burning Appliances and/ or local codes).
Electric Safety
• Before you plug in an electrical cord, be sure all controls are in the OFF position.
• For appliances equipped with a cord and plug, do not cut or remove the ground prong. It must be plugged into a
matching grounding type receptacle to avoid electrical shock. If there is any doubt as to whether the wall receptacle is
properly grounded, the customer should have it checked by a qualified electrician.
• This appliance should be installed in accordance with the National Electric Code or Canadian Electrical Code. It is
required that the cooktop be installed on a grounded, non-GFCI branch circuit.
• Installer - show the owner the location of the circuit breaker or fuse. Mark it for easy reference.
• Important - Save these instructions for the local electrical inspector’s use.
• Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON
accidentally.
• Be sure your appliance is properly installed andgrounded by a qualified technician. Installation, electrical connections
and grounding must comply with all applicable codes.
High Altitude Installation
This range is CSA certified for safe operation up to an altitude of 10,000 ft. without any modifications (except LP conversion,
when applicable).
Loading ...
Loading ...
Loading ...