Loading ...
Loading ...
Loading ...
37
EN
TROUBLESHOOTING
Gas burner
Problem Check to make sure that:
The burner cannot be lighted or the ame
is not uniform around the burner.
• The gas holes on the burner are not
clogged;
• All of the movable parts of burners are
xed correctly;
• There is no air ow around the
cooking surface
The ame does not keep lighting to the
burner with thermocouple
• You press the knob all the way;
• You keep pressing the knob
for enough time to activate the
thermocouple.
• The gas holes are not clogged
in the area corresponding to the
thermocouple.
The ame goes out while turning knob to
"Low" setting.
• The gas holes are not clogged.
• There is no air ow around the
cooking surface.
• The minimum has been adjusted
correctly (see the section entitled
"Minimum Regulation").
The cookware is not stable. • The bottom of the cookware is
perfectly at.
• The cookware is centred correctly on
the burner.
• The support grids have not been
inverted.
Ceramic burner
Problem Check to make sure that:
The cooking zones have become soiled. This may be caused by burnt on remnants
of food. This will not affect the working
of the appliance. However, you should
make sure that the cleaning instructions
are being followed regularly.
The residual heat indicator cannot work. If the cooking zone does appear to be
hotter than 60℃ and the residual heat
indicator has not come on, you should
call the Service Department.
Loading ...
Loading ...
Loading ...