Loading ...
Loading ...
Loading ...
36
EN
CLEANING AND CARE
Before cleaning or performing maintenance on your gas hob, disconnect it from the
electrical power supply (included battery power).
To extend the lifespan of the gas hob, it is absolutely indispensable that it is cleaned
carefully, thoroughly and usually, please keep in mind to the following:
• The enamelled parts and the glass top, must be washed with warm water without
using abrasive powders or corrosive substances which could ruin them;
• The removable parts of the burners should be washed usually with warm water and
soap, make sure to remove caked-on substances;
• Automatic igniter pin, the end must be cleaned carefully and usually, make sure
ignition keep working normally.
• Stainless steel top plate and other steel parts can be stained if keep touch with high
concentration calcareous water or corrosive detergents (containing phosphorus). To
extend the lifespan, we advise these parts be rinsed thoroughly with water and dry
them by blowing, It is a good idea to clean up any spills too.
• After glass hob working, the surface must be cleaned by a damp cloth to remove
dust or food residues. Glass surface should be cleaned regularly with warm water
and non-corrosive detergent.
While the cooking surface is warm, clean it with a suitable cleaning product and paper
towels, then rub with a damp cloth and dry surface. Such as aluminium foil, plastic
items, objects made of synthetic material, sugar or foods with a high sugar content that
have been melted onto the surface, it must be removed immediately.
While the cooking surface is still hot, clean it with a scraper and a transparent protective
lm which prevent to make more dirt. This also protect the surface from damage caused
by food with a high sugar content.
Do not use abrasive sponges or cleaning products, these holds true for chemically
aggressive cleaners, like oven sprays and stain removers.
Cleaning the grill/pan support, it is recommended to clean it while it is still hot. To move
grill away from the hob and put it in sink, remove the food residues or grease rst, after
grill has cooled, rinse it with water.
Greasing the gas valves
Over time, the gas valves may be stocked, and it is difcult to turn on/off. For this case,
should clean the inside of valve and greased it.
Kind reminder: This procedure must be performed by a technician authorized by the
manufacturer.
Loading ...
Loading ...
Loading ...