Loading ...
Loading ...
Loading ...
COMPATIBILITY REQUIREMENTS
Min 29"
Min 5"
AREA
MUST BE
CLEAR
PREPARING FOR INSTALL
STEP 1:
Unscrew and remove your old shower arm
and showerhead from the wall by turning
counterclockwise.* With Nebia by Moen,
you’ll no longer need it.
Then, remove the trim/escutcheon from the
wall. Before installing your new product, clean
all walls and surfaces.
* If needed, this may be the only step where you use vise grips
or a wrench.
To install Nebia by Moen, you will need:
SPACING
•
The water outlet must be in a wall
(not the ceiling).
•
The recommended floor to water
outlet distance is 72"-84"(183-213cm).
•
The minimum clearance from water
outlet to ceiling is 4" (10cm) (
A
).
•
Make sure there is 29" (74cm) (
B
) of clear
space between your shower arm and the
top of the trim/temperature controls.
•
The minumum clearance from nearest
side wall is 5" (13cm) (
C
).
OTHER
•
Your wall must have a ½" NPT (or ½"
BSPT) pipe connection (this is standard
in most bathrooms).
•
The wall surface cannot be slate.
WATER HEATER TEMPERATURE
of at least 115°F/46°C
WATER PRESSURE
of at least 20psi/1.4bar
Trim/Escutcheon
Shower Arm
Shower Head
3
Min 4"
A
B
C
Min 5"
C
Visit moen.com/nebia for tips and videos.
Trim/temperature
controls not included.
Loading ...
Loading ...
Loading ...