Loading ...
Loading ...
Loading ...
4 5
TECHNICAL SPECIFICATIONS
Model Number LT G30 / N0F-GT-300/36-A
Nominal voltage of product with battery 40 V d.c. 2.5Ah
No load speed 8000 /min
Cutting width 300 mm
Cutting line dia. 1.4mm
Sound pressure level(L
pA
) 80 dB(A) K=3.0 dB(A)
Power sound level(L
wA
) 96 dB(A)
Net weight 2.4 kg with battery pack
Vibrations 2.5 m/s² K=1.5 m/s² *
Battery charger B0Q-SP02-36
Input voltage & current 220-240V~, 50/60Hz 100W
Output voltage & current DC 40V 2A
Charger time 90 mins
* The following information :
That declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another.
That declared vibration total value may also be used in a preliminary assessment of exposure.
A warning :
The vibration emission during actual use of the power tool can differ from the declared total
value depending on the ways in which the tool is used, and
Of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use( taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
SAFETY INFORMATION
IMPORTANT
Please read these instructions fully before assembling
and operating.
Description of Symbols
Symbols are used in this manual to attract your
attention to possible risks. The safety symbols and their
explanations deserve your careful attention and full
understanding. The warning themselves do not prevent
the risks and cannot be a substitute for proper methods
of avoiding accidents.
Warning symbols on the machine
Before any use, refer to the corresponding
paragraph in the present manual.
This symbol, before a safety comment, indicates
a precaution, a warning or a danger. Ignoring
this warning can lead to an accident for yourself
or for others. To limit the risk of injury, re, or
electrocution always apply the recommendations
indicated.
This symbol indicates the requirement of wearing
ear protection and eye protection when using the
product.
Avoid using tool in the rain.
Beware of thrown or ying objects to bystanders.
Keep all bystanders a safe distance from the
operating machine.
INTENDED USE
The product is intended for cutting weed, grass or similar soft vegetation in areas that are
hard to reach, e.g. under bushes, on slopes and edges. It may not be used to work on
unusual thick, dry or wet grass, e.g. pasture grass, or to shred leaves.
For safety reasons it is essential to read the entire instruction manual before rst operation
and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial trade use. It
must not be used for any purposes other than those described.
0
6
3
o
Loading ...
Loading ...
Loading ...