Loading ...
Loading ...
Loading ...
24 25
OPERATION
To Increase Line Length (Fig 13)
The grass trimmer comes with a full line spool.
The line wears down during work.
To feed in new line
1. Switch on the device, the line will automatically be increased by the centrifugal force.
2. Switch off and switch on again until the line is increased to the right length. The trimmer
line will be cut to the right length by the blade on the safety guard.
Fig 13
Working Advice
Cutting grass (Fig 14&15)
1. Always hold the trimmer at a safe distance from body and adopt a safe stance.
2. Switch on the unit.
3. Hold the trimmer at an angle of about 20° to the ground and guide the trimmer in a semi-
circular motion around your standing position.
Fig 14 Fig 15
20°
NOTE: For a good cutting performance, cut high grass in stages. Starting from the
tip. (Fig 16)
Fig 16
Trimming Edges (Fig 17&18)
This grass trimmer can be not only used for trimming grass but also used for cutting
the lawn edge.
Especially, when the lawn edge is close to wall, fence, etc.
The edging function of this device is very helpful, to deal with this kind of situation.
To get the cutting edge function.
1. Depress the edging function convert button, and hold it in place.
2. Turn the operating handle by 90°,for changing its function to edging mode. Then release
the edging function covert button to lock it in place.
Now you have converted the grass trimmer to an edge trimmer for cutting the lawn edge.
Fig 17 Fig 18
grass ground
Wall
OPERATION
SAFETY INFORMATION
OPERATION
Loading ...
Loading ...