Loading ...
Loading ...
Loading ...
22 23
SWITCHING ON AND OFF (Fig 12)
WARNING!
Before operating the device. remove stones, loose pieces of wood and other objects
from the cutting area.
To switch on
1. Hold the product rmly in both hands.
2. To switch on the product, push the safety button forward with your thumb, and hold it in
place, then press the main switch.
To switch off
Release the main switch.
WARNING: The trimmer runs on for several seconds after it has been switched off.
NOTE: Always switch off trimmer before placing it down.
NOTE: Do not carry the trimmer by the main switch.
Fig 12
Step 2: Main switch
Step 1: Safety button
To obtain the best life from the battery
Never allow the battery to completely discharge before recharging. The battery pack should
be placed on the charger whenever the battery pack is noticeably running down or the tool no
longer performs a task it previously performed.
Avoid conducting short charges. Make sure that the battery is fully charged every time by
allowing the charger to complete its full charging cycle.
Avoid allowing lose items like screws or nails etc. to be stored with battery packs as these or
similar items can short battery packs and cause a re or explosion
Always unplug the charger when not in use and store in a dry secure place.
Avoid charging or storing your battery in temperatures below 0°C and above 45°C.
Cool down hot battery pack from a just-operated tool for approximately 30 minutes before
attempting to recharge.
Removing and inserting the battery pack (Fig 11)
To insert the battery pack
Align the battery pack with receptacle on the device. Push the battery pack toward it until
hear click sound. It means the battery pack has been locked in position.
WARNING: make sure that the tool is “OFF”
Fig 11
To remove the battery pack from the tool
Press the battery pack release button downward, and pull the battery pack out to remove it.
OPERATION
SAFETY INFORMATION
OPERATION
Loading ...
Loading ...
Loading ...