Loading ...
Loading ...
Loading ...
26 27
WARNING: Before performing any repair work, always remove the battery pack and
wait until the cutting blade has come to a standstill.
1. Do not spray the unit with water. Ingress of water may destroy the battery pack and the
electric motor.
2. Clean the unit with a cloth, hand brush, etc.
3. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition;
4. Replace worn or damaged parts for safety.
Battery Maintenance:
Use the following procedures to enable optimum usage of the battery:
1. Protect the battery against moisture and water.
2. Store the battery only within a temperature range from 0ºC to 45ºC. As an example, do
not leave the battery in a vehicle or in the trimmer in direct sunlight.
3. Clean the ventilation slots of the battery occasionally with a soft, clean and dry brush. A
considerably shortened operating time after charging is an indication that the battery is
exhausted and must be replaced.
4. If you do not use the product for a long time, please charge and discharge the battery
park once every 6 months.
Storage
Clean the exterior of the machine thoroughly using a soft brush and cloth, Do not use water,
solvents or polishes.
Store the machine in a dry place. Do not place other objects on top of the machine.
Transport
Use the original packaging to ship whenever possible.
Consumable parts list
We offer 6 months of warranty period for consumable parts of this machine, consumable
parts are as follows:
Spool
Battery
Charger
TIPS
1. For best results, do not cut wet grass because it tends to stick to the cutting head and
guard, prevents proper discharge of grass trimmings, and could cause you to slip and
fall.
2. Pay special attention when performing the work close to trees and bushes. The cutting
head could damage sensitive bark, and damage fence posts.
3. Use the ower protector to avoid cutting device contact with hard objects such as walls
and kerbstones.
4. If you want to have a rest for a short while during work time, nd a at ground, and
adjust the operating handle to upright angle, this device can stand on ground by itself.
Fig 19
Replacing The Nylon Line Spool
WARNING: Before performing any assembly. Always ensure that the battery pack has
been removed. If the nylon cutting line is broken and the nylon spool needs replacing:
1. Press together the both locking devices at the spool cover and remove the spool cover.
Remove the old spool.
2. Thread the new/relled spool line through the eyehole in the trimmer head.
3. Fit the line spool in the trimmer head.
4. Ret the line spool cover.
WARNING: Never use steel, wire, rope, string, etc. which can break off and become a
dangerous missile.
Fig 20
grass ground
Line spool
Line spool cover
OPERATION
SAFETY INFORMATION
STORING AND MAINTENANCE
Loading ...