Loading ...
Loading ...
Loading ...
en-US
30
Problem Possible cause and solution
The cleaning perfor-
mance is poor.
The dust box is full.
Empty and clean the dust box.
The roller brush is dirty or worn out.
Clean the roller brush.
Replace the roller brush.
The seals on the dust box are dirty or worn out.
Clean the seals and the suction channel between
them.
Replace the seal unit.
The exhaust filter is dirty.
Clean the exhaust filter.
Replace the exhaust filter.
The side brushes have worn out.
Replace the side brushes.
The robot vacuum
cleaner is not charging.
The base station is not connected correctly.
Connect the base station exactly as described in
these operating instructions, see section “Prepar-
ing for use – Connecting the base station”.
The robot vacuum
cleaner does not return
to the base station after
vacuuming.
The Auto standard vacuuming mode was started
somewhere in the room.
The robot vacuum cleaner will return to its starting
point.
The Spot vacuuming mode has been selected.
The robot vacuum cleaner will return to its starting
point.
There is insufficient light for the robot vacuum cleaner
to navigate.
Provide sufficient lighting.
The base station is not connected correctly.
Connect the base station exactly as described in
these operating instructions, see section “Prepar-
ing for use – Connecting the base station”.
The signal between the infrared transmitter on the
base station and the vacuum cleaner is broken.
Loading ...
Loading ...
Loading ...