Loading ...
Loading ...
Loading ...
en-US
29
Frequently Asked Questions
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department. Time and money will be saved because a
service call will not be needed.
This guide may help you to find the reason for the fault, and how to correct it.
Switch the robot vacuum cleaner off before dealing with any problems. To
switch it off, slide the I/0 switch on the side of the robot vacuum cleaner to the
0 position.
Problem Possible cause and solution
The robot vacuum
cleaner switches itself
off after it has been
switched on using the
Power button.
The rechargeable battery is not sufficiently charged.
Connect the robot vacuum cleaner correctly to the
charging contacts on the connected base station.
The robot vacuum
cleaner does not react.
The robot vacuum cleaner is switched off.
Switch it on (slide I/0 to I).
The batteries in the remote control have been inserted
incorrectly.
Make sure the polarity is correct.
The batteries in the remote control are dead.
Replace the batteries.
The signal between the infrared transmitter on the
vacuum cleaner and the remote control is broken.
Clean the front of the robot vacuum cleaner and
the top of the remote control carefully with a soft,
dry cloth and make sure that no items disrupt the
signal.
The remote control is too near to the robot vacuum
cleaner or too far away from it.
Increase or decrease the distance and when using
the remote control direct it towards the robot vac-
uum cleaner.
Loading ...
Loading ...
Loading ...