Loading ...
Loading ...
English - 3
Regulatory Information
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, this is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the
one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by Bose
Corporation could void the user’s authority to operate this
e quipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause unde-
sired operation.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/ NMB-3(B)
This device complies with FCC and Industry Canada RF radiation
exposure limits set forth for general population. It must not be co-
located or be operating in conjunction with any other antennas or
transmitters.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
This equipment should be installed and operated with a minimum
distance of 8 in. (20 cm) between this device and your body.
Product data loger
This system features a product data logger that is designed to help
Bose better understand product usage and performance over time.
The product data logger records certain technical data and usage
history, including but not limited to volume levels, on/off data, user
settings, source inputs, power output, and setup data. We may use
this data to provide you with better service and support on your
system and to improve product design in the future. Special equip-
ment is required to read the data stored by the product data logger
and such data can only be retrieved by Bose if your system is re-
turned to Bose for service or as returned merchandise. The product
data logger does not collect any personally identifiable information
about you and does not record title, genre or other information
about the media content you access while using your system.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part
Name
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexava-
lent
(CR(VI))
Polybrominat-
ed Biphenyl
(PBB)
Polybromi-
nated diph-
enylether
(PBDE)
PCBs X O O O O O
Metal
parts
X O O O O O
Plastic
parts
O O O O O O
Speakers X O O O O O
Cables X O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part
is below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572.
Please complete and retain for your records
Record the serial number of your new Wave
®
Music System IV in
the space below. The serial and model numbers can be found on
the bottom panel.
Serial number: _____________________________________________
Model number: ____________________________________________
Purchase date: _____________________________________________
We suggest you keep your receipt with this owner’s guide.
Date of manufacture: The four bolded digits in the serial number
indicate the date of manufacture. The first digit is the year of manu-
facture; “5” is 2005 or 2015. Digits 2-4 are the month and date;
“001” is January 1 and “365” is December 31.
China Importer: Bose Electronics (Shanghai) Company Limited,
Part C, Plan 9, No. 353 North Riying Road, China (Shanghai) Pilot
Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60,
1441 RG Purmerend, The Netherlands
Taiwan Importer: Bose Taiwan Branch, Room 905, 9F, Worldwide
House, 131 Min Sheng East Rd, Section 3, Taipei, Taiwan, 105
The distinctive design of the Wave music system is a registered trademark of Bose Corporation in the U.S. and other countries.
©2017 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Loading ...
Loading ...
Loading ...