Loading ...
Loading ...
Loading ...
16 - English
Troubleshooting
Problem What to do
System does not function Connect the system to AC (mains) power.
Unplug the power cord from the AC wall outlet for 10 seconds and then reconnect it; this resets
the system.
Tap the touch pad on the top of the system (see page 8).
No sound Increase the volume.
Eject and reload the CD.
Disconnect headphones from the system (connecting headphones mutes the speakers).
Poor sound quality If the bass is too heavy or low, adjust the bass level of the system using the setup menu (see page 15)
If listening to an external AUX source, use a stereo cable and make sure it is fully inserted.
Remote control is
inconsistent or does
not work
Operate the remote control closer to the system.
Check that the remote control battery is installed with positive (+) polarity facing up.
Replace the remote control battery.
Check for interference from fluorescent room lighting, sunlight, or dust or dirt on lens.
Try the system in a different location.
AM reception is weak Turn the system slightly one way and then the other to change the direction of the internal AM antenna.
Move the unit farther from a TV, refrigerator, halogen lamps, dimmer switches, or other electronic
equipment that generates electrical noise.
If neither suggestion works, you may be in an area of weak AM signal coverage.
FM reception is weak Extend the power cord as much as possible. The power cord acts as an FM antenna (see page 9).
See “Using an external antenna” on page 14.
CD does not play
Select the CD source or press
. The CD icon appears on the display.
Load the CD label-side up.
Check that the disc surface is clean, If not, try cleaning it.
Try another disc.
Care and Maintenance
Loading ...
Loading ...