Loading ...
Loading ...
Loading ...
OPERATION
Oven Control, Clock and Timer
Your new control has a series of tones
that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function. It will also
alert you that there may be a problem
with the functions. Below are the types
of tones and a brief description of
each.
TONES WHILE SETTING THE
CONTROL -- When you press a touch
pad you will hear a beep. This beep
will let you know you have placed
enough pressure on the pad to activate
it. (The arrow pads do not beep.)
END OF TIMED CYCLE TONE --At
the end of a timed cooking function,
you will hear 3 short beeps followed by
1beep every 6 seconds. This 6 second
beep will continue to sound until the
CLEAR/OFF pad is pressed or you
may select the special feature to cancel
this 6 second beep from sounding at
the end of future cycles.
TO CANCEL THE 6 SECOND BEEP
1. Press and hold the BAKE and
BROIL pads, at the same time for
3 seconds, until the display shows
"SF."
2. Press the KITCHEN TIMER ON/
OFF pad. The display will show
"CON BEEP" (continuous beep).
3. Press the KITCHEN TIMER ON/
OFF pad again. The display will
show "BEEP" (beep canceled).
4. Press the START pad to cancel
the 6 second beep and leave the
special feature mode.
If you would like to return the 6 second
beep, repeat steps above until the
display shows your choice and press
the START pad.
ATTENTION TONE --TMs tone will
sound if you make an error or an
oversight is made while setting an
oven function.
Examples would be:
a. Setting a clean cycle and the oven
door is net properly closed.
b. Setting a function and net pressing
the START pad.
ยข. Pressing an additional function pad
%thout first setting a temperature OF
time.
Any of these can be quickly identified
by watching the display.
PREHEAT TONE -- When you set an
oven temperature, the oven
automatically starts to heat. When the
temperature inside the oven reaches the
temperature you have set, a tone will
sound to let you know the oven is ready
for baking.
Ifyou set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F-4" or "FI" there may be
a problem with the control or oven.
Simply press the CLEAR/OFF pad and
wait about an hour. Try setting the
function again. If the code repeats,
write down the flashing code and call
for service. Tell the technician what
code was flashing.
Loading ...
Loading ...
Loading ...