Loading ...
Loading ...
Loading ...
22
Troubleshooting
POSSIBLE PROBLEM EASY SOLUTION
Machine will not work when
switched ON
•
The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into the
two grooves on either side of the juicer cover.
Motor appears to stall when
juicing
•
Wet pulp can build up under the juicer cover if the juicing action
is too vigorous. Try slower juicing action by pushing the food
pusher down more slowly. Follow Disassembling and Cleaning
instructions and clean the filter bowl surround, the juice disc and
the juicer cover.
•
The juicer will automatically stop operating if the motor is stalled
for more than 10 seconds. Either too much food is being processed
at one time or the pieces are not small enough. Try trimming the
food or cutting into smaller pieces of even size and processing a
smaller amount per batch. To continue juicing, reset the juicer by
pressing the ON/OFF switch on the control panel to OFF then
turn the appliance back on by pressing ON/OFF switch to ON.
•
Hard fruits and vegetables will put excess strain onto the motor if a
low speed is selected. Please refer to the juicing guide to determine
the correct speed for the fruits and vegetables selected for juicing.
Excess pulp building up the
Stainless Steel Filter Disc
•
Stop the juicing process and follow Disassembling Instructions.
Remove the juicer cover, scrape off pulp, reassemble and begin
juicing again. Try alternating (soft and hard) vegetable and fruit
varieties.
Pulp too wet and reduced
extracted juice
•
Try a slower juicing action.
•
Remove juice disc and thoroughly clean mesh walls with a cleaning
brush. Rinse the juice disc under hot water. If the fine mesh holes
are blocked, soak the basket in a solution of hot water with 10%
lemon juice to unblock the holes or wash in the dishwasher.
This will remove excess fibre build up (from fruit or vegetables)
which could be inhibiting the juice flow.
Juice leaks between the rim of the
juicer cover
•
Try a slower juicing speed and push the food pusher down the feed
chute more slowly.
Juice sprays out from spout
•
Use juice jug and lid provided, or if juicing into a glass use the
custom designed juice nozzle.
•
Try using fruits with more water content to help flush through the
contents. Additionally, try a slower juicing action by feeding one
piece in at a time and by pushing the food pusher down
more slowly.
Loading ...
Loading ...
Loading ...