Loading ...
Loading ...
Loading ...
12
PREPARATION OF FRUIT AND
VEGETABLES FOR FROOJIE
®
EXTRACTOR
Only soft fruits should be used with the
Froojie
®
extractor.
When using fruits with hard inedible skins,
such as mangoes, pineapple or kiwi fruit,
always peel before juicing.
When using fruits with a hard core such as
pineapple, always remove this before juicing.
All fruits with pits, hard seeds or stones such
as nectarines, peaches, mangoes and apricots
must be pitted or deseeded before juicing.
Passionfruit pulp, peeled kiwi fruit and berries
can be processed without removing seeds.
NOTE
When using the Froojie
®
extractor, use low
speeds (speed 1 or 2). Always ensure motor is
running before adding fruit and/or vegetables
to feed tube.
FROOJIE
®
EXTRACTOR SPEED
Apricots (stone removed) 1
Bananas (peeled) 1
Kiwi fruit (peeled) 1
Mangoes (peeled, stone removed) 1
Melons (peeled) 1
Pears soft (stalk and core removed) 1
Pineapple (peeled and cored) 1
Raspberries 1
Strawberries (stalks removed) 1
Watermelon (peeled, seeds removed) 1
Use speed 2 to push out any remaining
fruit pulp in juice collector
2
WITH JUICE EXTRACTOR OR
FROOJIE
®
EXTRACTOR
1. Wash selection of fruit and vegetables to
be juiced.
NOTE
Most fruit and vegetables such as apples,
carrots and cucumbers will not need to be
cut or trimmed to size as these will fit whole
into the feed chute. Ensure vegetables such
as beetroot, carrots, etc. have all soil removed,
are well washed and trimmed of leaves before
juicing.
2. Based on the type of fruit or vegetable you
are juicing/pureeing select either the juice
extractor or the Froojie
®
extractor.
WARNING
Do not put hard fruit and vegetables (i.e.
Carrots, apples, fresh beetroot, etc.) or ice
through juicer when using Froojie
®
extractor.
This could damage parts of the unit.
3. Ensure the juicer is correctly assembled.
Refer to "Assembly". Ensure the juice jug
(or a glass) is placed under the spout and
the pulp container is in position before
commencing juicing.
4. Plug the power cord into a 230/240V
power outlet. Turn the power on at the
power outlet. The LCD display
will illuminate.
Functions
Loading ...
Loading ...
Loading ...