Loading ...
Loading ...
Loading ...
Installing the stands
1
Fasten the matching stand to the TV with 2 screws (included).
2 screws
required
2
Fasten the other stand to the TV with 2 screws (included).
2 screws
required
3
Both stands should now be securely fastened.
4
Remove the plastic bag.
Note(s)
●
A wide open space is recommended for assembly.
●
A Phillips-head screwdriver is required to fasten the stands to the TV set.
●
When attaching the stand, ensure that all screws are tightly fastened. If the
stand is not properly attached, it could cause the unit to fall, resulting in
injuries as well as damage to the unit.
●
To remove the stand from this unit, unscrew the phillips-head screws by
reversing the procedure. Be careful not to drop the stand when you remove
it.
Lifting the TV set
Carefully lift the TV set as shown in the illustration and place it onto a
stable, level surface.
Installing the remote control batteries
1
Open the battery cover by firmly sliding down.
2
Insert 2 AAA(1.5V) batteries matching the polarity indicated inside
battery compartment of the remote control.
3
Slide the cover back into position.
Caution(s)
●
For remote controls that have the battery cover on the front, please take
care to slide the cover down BEFORE lifting it off to prevent accidentally
breaking the tabs that hold it in place.
Note(s)
●
Remove the batteries if not using the remote control for an extended period
of time.
10 .English
Continued on next page.
Loading ...
Loading ...
Loading ...